Bones
Full Member
Posts: 114
|
Post by Bones on Feb 18, 2003 12:13:43 GMT -5
Hey everyone. Found this board from a friend of a friend type deal. I live in N. KC, MO and use to have a 4runner, after the roll in Moab, it's now an 86ish Xcab on the 4runner frame. Lots more to do, but I'll like it more than the 4runner. I'd like to meet more wheelers, so drop me a line and we'll have a beer. I plan to hit Disney a lot this sping/summer/fall. Brief rig specs. Rear IFS axle with 5.29's and a Detroit Soft Locker Front D44, 5.38's and an ARB Rockstomper tie rod and drag link Parts Mike raised steering arms Powertank UPS-10 Rancho 44044 Front Springs 14" Bilstien 7100's w/ remote res and tube shock towers All Pro 5.5" Rear Springs, Dual Tcase Skid Plate 14" Bilstien 7100 non-remote res rear AA Dual Tcase adapter and 4:1 gears in rear case for a 190:1 crawl ratio Warn HS9500i 15x8" Black Rockcrawlers w/37x12.5" MTR's Front Driveshaft by High Angle Driveline Rear Driveshaft by Inland Truck Parts Here is it post roll Donor Xcab for free Cab on my frame Front clip attached
|
|
|
Post by Pdaddy on Feb 18, 2003 12:35:10 GMT -5
Hurry up and get that thing done man!!! Ill come drink your beer anytime Bro!! ;D
|
|
Bones
Full Member
Posts: 114
|
Post by Bones on Feb 18, 2003 12:51:38 GMT -5
Are you talking to me on a cell phone? prank caller prank caller! ;D Mine will be done before yours and that's getting a fuel cell made to boot
|
|
|
Post by Pdaddy on Feb 18, 2003 13:31:38 GMT -5
Maybe so maybe no, we shall see. I got my front so close to going back on If I had a day to finish it'd be all good. ITs geared the ball joints are all new, the knukle is drilled and tapped both knuckles on it, just need to throw it back together and under the rig, then do the rear gears and disc make it purty and weld on the rear perches. d**n this part time weekend job!
|
|