|
|
Post by bluexj89 on Jan 25, 2003 0:35:52 GMT -5
Ok I think I am going to be getting a 84ish Ford Bronco. I was wandering if anyone knew what trans. and transfer case this thing might have? I think it has a 300ci with a 4 speed.
Mark
|
|
|
|
Post by ZekesRide on Jan 25, 2003 1:21:54 GMT -5
It also has a Twin Traction Beem Front end. It should have a np435 of T18
|
|
|
|
Post by ZekesRide on Jan 25, 2003 19:55:32 GMT -5
Hey Mark, there is also a dodge axle with Flat tops on it over here at sutton's, drum brake though. And one hub is broken at the whieel flange. I believe you can put the cheby brakes and spindles on these too.
Harold
|
|
|
|
Post by bluexj89 on Jan 26, 2003 8:36:39 GMT -5
Did you get your other Axle? I really think I'd rather stay with the Ford (why is beond me :  setup. Plus isn't the Dodge a Passenger side diff? I hope to get the Bronco next Saturday! Mark |
|
|
|
Post by ZekesRide on Jan 26, 2003 10:12:00 GMT -5
That was just in case you need extra nuckles. Of course someone with a CJ or early Waggy may want on of those.  Or, you may want the knuckles because there are warn lockouts on them. |
|
setup. Plus isn't the Dodge a Passenger side diff? I hope to get the Bronco next Saturday!
Or, you may want the knuckles because there are warn lockouts on them.