Post by andyr354 on Aug 9, 2003 21:54:37 GMT -5
Well, started around 7 and just got in from putting my 4.5" coils in the front (10:30).
Lifted it about 2-2.5" over where the front was, a 2" block in the rear should level it out about right.
Kinda looks like some sort of gheto cruiser right now
For those who have put YJ front brake lines on how did you mount them? I put them on so the bend in the tube points to the back, then put the tires back on and gave them some clearance from the tire and from the shock when turned all the way.
Looks like the YJ shocks I got should be about right. They are 3" longer than the stock ones (looked like the factory shocks) on it. With the 1.5" BPE I made and 2" of hockey pucks. Shock runs out of length right befor the LCA bottoms out on the axle bracket (rustys adjustables).
Steering is WAY out of whack again will have to adjust it yet.
Lifted it about 2-2.5" over where the front was, a 2" block in the rear should level it out about right.
Kinda looks like some sort of gheto cruiser right now
For those who have put YJ front brake lines on how did you mount them? I put them on so the bend in the tube points to the back, then put the tires back on and gave them some clearance from the tire and from the shock when turned all the way.
Looks like the YJ shocks I got should be about right. They are 3" longer than the stock ones (looked like the factory shocks) on it. With the 1.5" BPE I made and 2" of hockey pucks. Shock runs out of length right befor the LCA bottoms out on the axle bracket (rustys adjustables).
Steering is WAY out of whack again will have to adjust it yet.