|
|
Post by bluexj89 on Nov 6, 2003 21:25:21 GMT -5
I know under the dang Jeep! I was wanting to know placement towards the front towards the back facing front. I was thinking in front of the front tire and facing back would eliminate shadows that would occure if they were mounted rear ward and facing forward, But I also get introuble when I think.
I also want to move the shifter in Blue to a easier to get to location. Is there any articles on how to do this? Would it be easier to use a aftermarket shifter? Any help would be appriciated!
|
|
yjrockcrawler
Full Member
Its a jeep thing, and i still don't understand!
Posts: 144
|
Post by yjrockcrawler on Nov 6, 2003 21:43:54 GMT -5
you want to put them under the jeep ? if so i would put up high above the frame so thay wont get hit , and you have a stick or an auto? if you have an auto i would go after mARKET AND YOU COULD MOUNT IT ANYWARE LIKE ON YOUR DASH OR CLOSE TO YA ON A MOUNT, WHERE ARE YOU LOCATED ? I MIGHT BE ABLE TO COME BY AND HELP YA FIG OUT A PLACE TO MOUNT THE LIGHTS
|
|
|
|
Post by bluexj89 on Nov 6, 2003 21:56:34 GMT -5
Manhattan. I wish I could mount them High up on the Frame! I wish I had a frame! I would really like to keep the stock shifter. I have grown attached to it;) Really I like the price of it. But If i have to I will buy an aftermarket but it will be down the road a couple of months years...
|
|
yjrockcrawler
Full Member
Its a jeep thing, and i still don't understand!
Posts: 144
|
Post by yjrockcrawler on Nov 6, 2003 21:59:58 GMT -5
ok your shifter run of cabel ? if so you can mount it anyware
|
|
|
|
Post by bluexj89 on Nov 6, 2003 22:02:52 GMT -5
it actually has 2 cables but i think one is for the brake lock.
|
|
|
|
Post by rob83cj8 on Nov 6, 2003 22:10:26 GMT -5
Ya gotta go on night runs before ya need rock lights!  |
|
|
|
Post by bill1986K5 on Nov 6, 2003 22:14:53 GMT -5
;D ;D
|
|
|
|
Post by ksuyellowtj on Nov 6, 2003 22:20:35 GMT -5
Mark will just brake more stuff at night. ;D
|
|
TIKLTHS
Full Member
Do it in a fullsize... or break something trying!
Posts: 122
|
Post by TIKLTHS on Nov 7, 2003 0:21:40 GMT -5
;D ;D ;D yah Mark come out at night and see ours then you can figure out where to put your . |
|
|
|
Post by ZekesRide on Nov 7, 2003 20:47:05 GMT -5
After them clowns, my suggestion is mount them on the rear seat belt mounts in the DS tunnel, you'll see what I mean if you crawl under. Kind of a oval washer with a couple of tabs on them. Point across the shart and wire them up.
Harold
|
|
|
|
Post by bluexj89 on Nov 9, 2003 11:13:11 GMT -5
OK Enough on the lights! I really don't like night wheeling, I have a hard enough time drivung in day light let alone wheeling when I cannot see or breath! I think the shifter will be an easy move but I am wondering if the cable will be long enough? I am going to have to krawl under and see how long things are. (Oh that sounds bad!)
|
|
