|
Post by kraziexj on Nov 23, 2003 15:30:11 GMT -5
I am almost certain that one of my calipers is going bad. it moves up and down, like the holes are wallowed out. The mount bolts are fine. My question is do i need to replace both calipers at the same or can i just replace the one?
|
|
yjrockcrawler
Full Member
Its a jeep thing, and i still don't understand!
Posts: 144
|
Post by yjrockcrawler on Nov 23, 2003 16:56:25 GMT -5
yes i would do both if not you have the new one that moves freely and the other one that is a lil bit slower, and always my luck the old one would go bad a week later , and i would do the calps and new pads and maby get the rotors turend too then you know its all new brakes up front
|
|
|
Post by bluexj89 on Nov 23, 2003 17:32:17 GMT -5
You can do just one at a time. since they are new enough. I figured you replaced them after the Krawl stranger.
|
|
|
Post by ZekesRide on Nov 27, 2003 9:20:23 GMT -5
and maby get the rotors turend too then you know its all new brakes up front Don't bother turning the rotors if you have the ones with a stamped spider. Harold
|
|