|
Post by rob83cj8 on Nov 14, 2003 20:14:25 GMT -5
I've got the final piece of the puzzle and I'm ready to sell my current axles and some other misc. parts that I have lying around. Here's what I got- AMC 20 w/4.56 gears, Detroit locker, Moser axle shafts, Tom Woods HD yoke, axle tubes welded to the housing, the only thing that needs repaired is the right brake cylinder needs replacing. D30, Milemarker hubs, 4.56 gears, True-Trac, RS5000 stabilizer, Go-Fer-It OffRoad HD tie-rod(1.25" solid rod)with Dodge ends(same taper as Jeep ends but the shank is alot bigger than a Jeep end)Go-Fer-It OffRoad tie-rod flip kit, this puts the tie-rod on top of the steering knuckles instead of underneath, gains about 3" of clearance for the tie-rod and you can have a 3" suspension lift and not need a dropped pitman arm to correct the steering geometry. This works great for a SUA set-up, but won't work with SOA. These axles are from my '83 CJ8, so they're wide track axles. $1200 for the pair. They're located in Barnes KS, I live in the boon-docks so shipping them is not an option, delivery or partial delivery may be an option depending on circumstances. If anyone has questions you can post here or email me at droptt@yahoo.comScout rear D44 w/3.73's and open diff-$100 CJ8 3" nerf bars-$50 2 sets of chevy D44 flat top knuckles-$75 per pair I'll list more stuff as I find it. I'll consider offers and trades.
|
|
|
Post by rob83cj8 on Dec 21, 2003 20:53:47 GMT -5
BTT ;D
|
|
81Toy
New Member
Posts: 26
|
Post by 81Toy on Dec 21, 2003 23:24:52 GMT -5
Rob are those d44 flat tops? If so I would take a set if I can scrounge up the money shortly after x-mas .
|
|
|
Post by rob83cj8 on Dec 22, 2003 5:49:51 GMT -5
Ooops! I knew I was forgetting something, yup they're D44 flat tops, I've edited the post to show that.
|
|