|
Post by ZekesRide on Dec 6, 2003 19:33:37 GMT -5
If you need a 203, I know were several are, I asked today, he said $100
Harold
|
|
TIKLTHS
Full Member
Do it in a fullsize... or break something trying!
Posts: 122
|
Post by TIKLTHS on Dec 7, 2003 23:35:54 GMT -5
Thanks Harold . I have a 203 now , but could a person double the 203's .I know most people don't like the "chain drive" but as Brian said its a 2 1/2 " chain and just make sure you run 10/40 in it and they hold up good. John
|
|
mike4x4neb
Full Member
Gotta Love a Fullsize on Rocks!!!!!!!!!
Posts: 180
|
Post by mike4x4neb on Dec 8, 2003 19:25:44 GMT -5
hey john I know where to get a 205 one of the junkyards that is about 2 hours west of me has a few and wants $250 for them so if you are interested let me know
Mike C.
|
|
TIKLTHS
Full Member
Do it in a fullsize... or break something trying!
Posts: 122
|
Post by TIKLTHS on Dec 8, 2003 22:33:28 GMT -5
I found the Marlin 4.7 kit for $399 last night for $719 they will send you a complete rebuild w 4.7 in it. John
|
|
TIKLTHS
Full Member
Do it in a fullsize... or break something trying!
Posts: 122
|
Post by TIKLTHS on Dec 8, 2003 23:03:24 GMT -5
Stech your frame John and run a doubler Why would I want to do that I have enough room now? Just not enough $$ !! John
|
|
ap
New Member
let's go wheeling!!!!!!!
Posts: 33
|
Post by ap on Dec 11, 2003 23:24:54 GMT -5
8-)I think that you have enough wheelbase right now, but you will probably have to run a rear cv driveshaft.
|
|
TIKLTHS
Full Member
Do it in a fullsize... or break something trying!
Posts: 122
|
Post by TIKLTHS on Dec 11, 2003 23:35:42 GMT -5
I think you're right Allen , i've read articles on a couple of doubled blazers It does take some work but can be done. I'll have to check that one on CK-5 they have a good article on doing the install. John
|
|